Your aircraft, maintained on the field at Fairchild.

Your aircraft, maintainedon the field at Fairchild.

Scheduled inspections, repairs and engine work by Citizen Air's own A&P and IA technicians, in our own hangars. The same team that keeps our Part 135 fleet flying looks after yours.

  • A&P and IA on staff
  • Tecnam Authorized Service Center
  • Factory trained: Cirrus, Phenom 100, Tecnam
  • 100+ years combined

What we do

From the annual to the engine change.

You do not need to be in one of our programs. Any owner can bring an aircraft to us, and most of the work below is done in our own hangars without the aircraft leaving the field.

Scheduled inspections

Annual, 100-hour and manufacturer interval inspections, signed off in-house by our Inspection Authorization holders.

ADs and service bulletins

Airworthiness Directive and Service Bulletin research, compliance and the records to show it.

Routine and preventive maintenance

Oil changes, tires, brakes, batteries, plugs and the items that keep an airplane reliable between inspections.

Troubleshooting and repair

Squawks run down and fixed, from an intermittent radio to a rough magneto, with a clear write-up of what we found.

Engine work

Engine removal, overhaul coordination, reinstallation and the break-in that follows. The SR22 above is mid engine change.

Avionics and modifications

Coordination of avionics, systems and modification work, including the shops we partner with when a job needs specialist equipment.

Parts and logistics

Parts sourced and tracked so the aircraft is not waiting on the shelf, with factory channels for the types we are trained on.

Records and tracking

Inspection intervals, recurring airworthiness items and component times scheduled and monitored, so nothing is left to memory.

Considering a purchase? Pre-purchase inspections are part of our Consulting and Advisory service: our technicians do them on the types they are trained on, and on other types we arrange a qualified shop and oversee the inspection there. Consulting and Advisory.

Checking the propeller of a Citizen Air Tecnam P2012 Traveller on the ramp

Tecnam Authorized Service Center

Factory-authorized support for the P2012 and the Tecnam line.

Citizen Air is a Tecnam Authorized Service Center, and our technicians have completed Tecnam's factory maintenance training. Our own P2012 Travellers are part of our fleet, so the type that comes into our hangar is one we operate ourselves.

  • Factory-trained technicians for the P2012 Traveller and other Tecnam types.
  • Factory parts and technical support for the work we do.
  • A short flight from Seattle, Bellingham and Victoria.
Talk to us about your Tecnam

The team

Certificated, factory trained and on the field every day.

The credentials that matter in this work are held by individual technicians, not by a building. Ours hold the FAA mechanic certificate and the Inspection Authorization that lets annual and major inspections be signed here, without sending the aircraft anywhere.

A&P
Every technician

The FAA Airframe and Powerplant certificate, required to perform and approve maintenance.

IA
Inspection Authorization

Held by two of our team, so annuals and major repairs are inspected and signed in-house.

100+
Years combined

Across the maintenance team, with our most senior technicians at 30 to 40 years each.

3
Factory programs

Cirrus, Embraer Phenom 100 and Tecnam factory maintenance training.

Three members of the Citizen Air maintenance team in the hangar, a Cessna 172 and 206 behind them

Ryan Isam

Director of Maintenance

A&P

Nineteen years as a US Coast Guard aviation maintenance technician, including running the maintenance department at Air Station Port Angeles and teaching at the Coast Guard's technical training center. Embry-Riddle graduate.

John Rollston

Maintenance Manager

A&P · IA

An A&P since 1990 who apprenticed at this airport, and one of our two Inspection Authorization holders. He signs the annuals and major inspections, and he is the Director of Maintenance on our Part 135 certificate.

Micaiah Stinard

Aircraft Technician

A&P

Military aviation background. Works the fleet alongside Ryan and John in the hangar.

Part 91 or Part 135

Same team. Same standard. Different paperwork.

Owner flown

Part 91

Your aircraft is maintained to the manufacturer's program and the FAA requirements for its type. You hold responsibility for its airworthiness; we do the work and the inspections, and we document them so your records are always ready for a buyer or an inspector.

On our certificate, or managed by us

Part 135

Aircraft on our air carrier certificate are maintained under the approved inspection program tied to it, with the added intervals, tracking and recordkeeping that commercial flying requires. An owner whose aircraft we manage gets that same discipline.

Whichever applies to you, the people, the hangar and the standard of work are the same. What changes is the program the aircraft is maintained under and the records that go with it.

Aircraft we know

The types we fly are the types we know best.

We maintain our own fleet of Cessna, Cirrus, Tecnam and Embraer aircraft, and we take in the same types and others like them. If your aircraft is something we do not work on, we will tell you, and usually point you to someone who does.

A Cessna with its cowling removed in a maintenance hangar, the engine open for inspection
A technician working on a piston aircraft engine with a ratchet
A technician inspecting the engine of a single-engine aircraft in the hangar, tablet in hand

If you are stuck at Fairchild, we are already here.

Our maintenance hangar, our FBO and our fuel farm are on the same ramp. A transient pilot with a problem can walk from the aircraft to a technician, and a based owner can drop the airplane off on the way to work.

Tell the FBO desk in the terminal what is wrong, or call the number to the right. We will look at the aircraft, tell you what we think, and give you a straight answer on whether it is a quick fix, a part on order, or a ferry permit.

Maintenance desk+1 (360) 452-6226

maintenance@flycitizenair.com

8 am to 5 pm, seven days a week. Email and phone messages are monitored after hours for urgent needs.

How it works

From first call to sign-off.

  1. Tell us about the aircraft

    Type, registration, where it is based, total time and what you need. We reply within two hours during the day.

  2. Scope and estimate

    We go through the logbooks and the work with you and give you a written estimate before anything is opened up.

  3. The work

    You hear from us when we find something, not after we have fixed it. No surprises on the invoice.

  4. Return to service

    Logbook entries, a summary of what was done and what to watch, and the aircraft ready on the ramp or in the hangar.

Shop rate$138 an hour
AOG shop rate$145 an hour

Plus parts, and sales tax where applicable. Estimates are in writing before work starts.

Owners in our programs

Maintenance is part of the deal.

Fractional owners

Your share of a Cirrus SR22 or Phenom 100 is maintained by this team under the program's approved schedule. It is one of the things the monthly fee pays for.

Fractional ownership →

Managed aircraft

Place your aircraft on our certificate or keep it Part 91 and let us manage it. Either way, the inspections, the tracking and the records are handled here.

Aircraft management →

Renters and students

The 172s our students learn in and our pilots rent are maintained in the same hangar by the same people, which is why we say so on those pages.

Flight training →

Questions

What owners ask us.

Do I have to be in one of your programs?
No. Any owner can bring an aircraft to us for an inspection, a repair or ongoing maintenance. Most of the aircraft we look after are our own or in our programs, but the hangar door is open.
Who signs off the work?
Our technicians hold the FAA Airframe and Powerplant certificate, and two of our team hold an Inspection Authorization, so annual inspections and major repairs are inspected and signed here, under the manufacturer's and the FAA's approved programs for your aircraft.
Can you do my Cirrus annual?
Yes. We maintain two SR22s, our technicians are Cirrus factory trained, and the engine change in the photographs on this page is on one of ours.
What about the Phenom 100?
Our technicians are factory trained on the Phenom 100 and we operate one. Talk to us about what you need; some inspections on a jet call for equipment or authorizations that we arrange with a partner facility, and we will tell you which.
I fly a Tecnam. What does Authorized Service Center mean for me?
That Tecnam recognizes us to service its aircraft, our technicians have completed the factory's maintenance training, and we work with the factory on parts and technical support. We operate the P2012 ourselves.
Will you keep my aircraft inside while it is in work?
Yes. Aircraft in work are kept in our hangars.
How do I get an estimate?
Request service with the form on our contact page, or email maintenance@flycitizenair.com with the type, registration and what you need. We reply within two hours during the day, and we put estimates in writing before work starts.

Maintenance

Talk to our maintenance team.

+1 (360) 452-6226

+1 (800) 430-7483

maintenance@flycitizenair.com
flycitizenair.com

8 am to 5 pm Pacific, seven days a week

Follow us @flycitizenair

1402 Fairchild Airport Rd, Port Angeles, WA 98363